Effect of too fast cutting speed

① Accelerate the aging of parts and shorten the service life of the machine

The cutting principle of the vibrating knife leather cutting machine is to use the high-frequency vibration of the blade tens of thousands of times per minute to cut. If the cutting speed is too fast, the knife head and the connected beam will be under load. If things go on like this, it is easy to speed up the knife head and beam. The wear and tear will seriously shorten the service life of the machine. The replacement of the cutter head is not expensive, but the loss of the beam of the cutting machine is irreversible and the replacement cost is as high as hundreds of thousands.

②Waste of leather

If the cutting speed is too fast, the stay time of the knife head on the leather material is too short, and the cutting may occur continuously or one side is cut off but the other side is not cut off. Furthermore, the cut pieces have large errors and cannot be stitched later. Also can cause the waste of leather material.

③Reduce production efficiency

The fastest cutting speed does not guarantee the maximum production efficiency. The efficiency of the production links of laying, scanning and typesetting, cutting and receiving should also be considered. If all links cannot be connected, the faster the cutting speed, the higher the error rate. Especially in the online production mode, only when the degree of connection and balance between various links reaches the highest level can our production efficiency be maximized, which is far more important than simply increasing the cutting speed.

How to judge whether the cutting speed is appropriate

1. When a leather cutting machine is debugged by professionals, the cut surface of the cut piece is smooth and flat, and it can be directly sewn in the back section. The cutting speed at this time is ideal.

2. If the online typesetting mode is adopted, whether the connection between scanning, typesetting, cutting and receiving is efficient will have a greater impact on production efficiency. If you blindly pursue faster cutting speed, other production links will not be able to keep up. In fact, the machine cannot operate at full capacity, which is also a waste of working hours to a certain extent.

AOL is an industry-leading brand with 14 years of industry experience. We have provided services to more than 8,000 customers around the world and received satisfactory evaluations. We have many long-term stable cooperation customers. We provide personalized industrial material cutting solutions for many customers. If you encounter problems in industrial material cutting, we can provide you with free consultation and consulting services!