1 labor

1) The automatic feeding CNC cutting machine is an automatic feeding and automatic cutting machine. It only needs to use computer graphics, transfer the data to the machine control card, then send the pulse signal to the Panasonic servo drive to control the movement of the machine, and then send the signal to the cutting machine to cut the raw material. The cutting accuracy and speed are much higher than other material cutting machines, and the minimum error is 0.1mm. Only one person can operate the control panel of the CNC cutting machine and track the cutting progress.

2) When you are standing in a dangerous place very close to the working area of the machine, the CNC cutting machine is equipped with an infrared automatic induction system, which will automatically sense and suspend work to ensure the safety of the operator. All in all, buying an automatic feeding CNC cutting machine can save a lot of labor costs and provide the greatest guarantee for the safety of operators.

2 efficiency

1) The automatic feeding CNC cutting machine adopts Panasonic servo motor and reducer, adopts high-quality motor, and appropriately increases the torque, which not only ensures the cutting speed, but also ensures the cutting accuracy and depth control of thick material cutting. The whole process is controlled by the system. Material quality, according to different cutting materials, the maximum cutting speed can reach 1000mm/s,

2) The cutting method of the automatic feeding CNC cutting machine is physical cutting, using a blade to cut the material. The CNC cutting machine is equipped with a tool quick change module, which can quickly change the blades used for different materials. With strong adaptability and short replacement time, the machine has the longest working time and increases the working efficiency by at least 10%.

3 fully utilized materials

When the machine cuts the material, it will always leave some irregular shapes. These materials can only be wasted if they are underutilized.

The automatic feeding CNC cutting machine has an automatic edge finding function, which will automatically find the edge through the machine's scanning, including the missing part in the middle, and can fill the graphics you want to cut. This feature will save at least 10% of material costs.

4 Maintenance costs

1) The feed felt is a high-quality felt made in the Netherlands. It is made of PEY + TPU. It has good air permeability, low scratch resistance and low noise, strong friction and wear resistance, and does not require regular maintenance.

2) The automatic CNC cutting machine adopts a grinding wheel frame, which has high strength, strong wear resistance, small surface roughness, small tooth pitch error, stable high-speed movement, no abnormal vibration, high accuracy, and can reach or exceed 5 levels of accuracy. Compared with other racks, the grinding rack has a long use time and can maintain the smallest error range during use. Moreover, it has a long life span and low maintenance costs.

3) The tool is equipped with quick-change molds. Only the blade needs to be replaced regularly. For other machines, the blade mold integrated machine needs to replace the entire mold when the blade is worn, which is very expensive. This machine only needs to replace the blade. It can be replaced directly, no need to replace the entire mold, simple and convenient, low maintenance cost

All in all, from these aspects, automatic feeding CNC cutting machine and manual cutting or semi-automatic cutting have more advantages, but you must choose according to the actual situation.

If you want to know more about the automatic feeding CNC cutting machine, please contact us, we can also provide you with professional industry material solutions!